Avery Dennison Monarch Freshmarx 9417+ - Using DHCP to Obtain an IP Address; Using a Static IP Address

3-10 System Administrator’s Guide
Using DHCP to Obtain an IP Address:
You can use DHCP to automatically obtain the printer’s IP Address.
1. From the LAN Settings screen, select Use DHCP to obtain IP Add automatically.
2. Press OK. The printer automatically receives an IP address.
Using a Static IP Address:
You can assign the printer a static IP Address.
1. From the LAN Settings screen, select Use a Static IP Address.
2. Touch the text box next to each field to enter the information as needed on the keypad.
3. Press (Enter) on the keypad each time you complete a field.
4. Press OK when you are finished. The printer uses the static IP address.