3-12 System Administrator’s Guide
10. Touch the text box next to the Password. Enter the Password if necessary and press
(Enter) on the keypad.
11. Press Apply to save the changes. The printer establishes a network connection using the
provided information.
12. Press Refresh to refresh the settings and see the SSID, network status, and IP address,
etc.
13. Press OK when you are finished. For advanced WiFi setup, see Appendix B, “
Advanced Wi-
Fi Configuration”.
Connectivity Troubleshooting
Message Action
Status appears as Not
Associated or Not
Inserted on Wi-Fi
Settings screen.
♦ Make sure the SSID, security, and password (key) were
entered correctly.
♦ If the SSID is set correctly but “not inserted” appears for
status, turn off the printer. Wait several seconds then
turn it on. The printer should obtain a Wi-Fi IP address.
If it does not, call Technical Support.
To Next Page
Loading...
