Editing Product Data 4-1
EDITING PRODUCT DATA
This chapter explains how to
♦ add and remove product buttons
♦ change the “use first” buttons description
♦ edit categories and tab names
♦ add timers.
Entering Edit Mode
You can make changes to the product buttons; on the printer through Admin Tools or on your
PC using EasyEdit+ (refer to the EasyEdit+ System Administrator’s Guide on our Web site).
Some printed fields can only be edited using EasyEdit+.
1. Press the Tools button.
2. Press Admin.
3. Enter the Admin password then press (Enter). The default password is 1234.
4. Press Edit Product Data.
You return to the product
screen. The background
color of the screen changes
and “Edit Product Data”
appears at the bottom right
of the screen. After five
minutes of inactivity, you
must repeat steps 1 – 4. The
countdown is shown at the
bottom right of the screen.
To Next Page
Loading...
