4-2 System Administrator’s Guide
Adding and Removing Products
You must be in Edit Mode to add or remove product buttons.
To add a product button:
1. Press any empty product button.
*The Alternate Name field is shown if you enable Alternate Button Names (see “
Adjusting the
Language Settings” for more information). Enter the button’s alternate name as you want it to
appear when the operator presses the Language Toggle Button.
2. Select the Button Mode. The Button Mode field sets the button function. See “About Button
Modes” for more information.
You must click the link button to link a file to the button if you select Video, Document,
Label & Video, or Label & Document button mode.
To Next Page
Loading...
