Avery Dennison Monarch Freshmarx 9417+ - Editing the Use First Button

4-6 System Administrator’s Guide
Editing the Use First Button
You must be in Edit Mode to change the Use First button. This field has a maximum of four
words.
1. Press (Tools).
2. Press Use First.
*The Alternate Name field is shown if you enable Alternate Button Names (see “
Adjusting the
Language Settings” in Chapter 3 for more information). Enter the button’s alternate name as
you want it to appear when the operator presses (Language Toggle).
3. Enter the Button Name.
4. Enter the Label Data. This field is printed on labels when the Use First
button is pressed. If this field is left blank, the default text “Use First”
prints on labels.
5. Click Save to save the changes or Cancel to exit.
The “Use First” Button Name, “Use First” Alternate Name, and Label
Data fields have default values. You can press the  to clear the field
then click Save to use the default values.
BEST
BEFORE
07/01/13 2:20 PM
*Optional Field