5-2 Operator’s Handbook
3. Use the plastic utensil to press the L-shaped bar. The platen roller is released. You may
need to slightly open the front cover to eject the platen roller.
Note: Art is cut-away to show detail.
4. Clean the platen roller and printhead using a cotton swab moistened with isopropyl alcohol.
5. Allow time for the parts to dry.
6. Replace the platen roller.
7. Snap the cover into place.
8. Reload the labels. See “Loading Labels
” in Chapter 1 for more information.
Cleaning the Display
Make sure the printer is turned off when cleaning the display. Use a soft, lint-free cloth to
wipe the display.
Caution: Do not use sharp objects or abrasive cleaners on the display; they can cause
damage.
Cleaning the Printer
♦ Slightly dampen a cloth with water and wipe off the printer’s case.
♦ Open the cover and use a dry, soft-bristled brush to remove paper dust.
Caution: Do not use household cleaners to clean the printer.
To Next Page
Loading...
