Using Scanner Diagnostics
Use scanner diagnostics to view a bar code’s type and data in a bar code.
1. Touch the Home key and then select Scanner Diag.
2. Scan a bar code by pressing the trigger or selecting Start Scanning. You see the bar
code’s type and data.
3.
Touch OK to return to the desktop.
Setting 2D Scanner Options (Factory Installed Option)
1. Touch the Home key and then select Scanner Config.
2. Touch Page 2 to see the 2D bar code options.
Configuring PDF417
1. Select PDF417 from page 2 of the Scanner Configuration window.
2.
Touch OK to save all the settings and return to the Scanner Configuration window.
Configuring the Scanner 7-11
To Next Page
Loading...
