Avery Dennison Pathfinder 6140 - Defining the Interleaved 2 Of5 Options Tag (Optional)

Defining Bar Code Options 4-5
Defining the Interleaved 2of5 Options Tag (Optional)
Use the Options tag to define Interleaved 2of5-specific information.
Valid values include: a 32-bit unsigned decimal number.
It contains the following attributes: density, narrowbar, widebar, and barrierbar.
Syntax <Options density=”value” narrowbar=”value” widebar=”value”
barrierbar=”value” />
density Bar code density. Options: 1 to 13 as shown below. The default is 12.
Density
Selector
Density
(% or cpi)
Narrow Element Width
in Dots/Mils
Narrow to Wide
Ratio
1
1.1
21 / 103.4
1:3.0
2
2.1
12 / 59.1
1:2.5
3
3.2
7 / 34.5
1:3.0
4
4.2
6 / 29.6
1:2.5
5
5.6
4 / 19.7
1:3.0
6
6.3
4 / 19.7
1:2.5
7
7.5
3 / 14.8
1:3.0
8
8.8
3 / 14.8
1:2.3
9
9.6
3 / 14.8
1:2.0
10
11.2
2 / 9.9
1:3.0
11
11.0
2 / 9.9
1:3.0
12
12.7
2 / 9.9
1:2.5
13
14.5
2 / 9.9
1:2.0
narrowbar
widebar
Use the density table above. Using a non-standard value may produce
unreadable bar codes. Define in Pixels.
barrierbar Print a barrier bar (border lines at the top and bottom of the bar code). The
default is disabled (does not print a barrier bar). Options:
0 Disable
1 Enable (print a barrier bar)
Example <Options density=”8” barrierbar=”1” />
Creates an I 2of5 bar code with a density of 8 and prints a barrier bar.