Need help?Do you have a question about the Avery Dennison ZM 110 and is the answer not in the manual?
General| Brand | Avery Dennison |
|---|---|
| Model | ZM 110 |
| Category | Scales |
| Language | English |
Compliance statements for US and Canada regarding radio frequency emissions.
Emphasizes the need for proper training before operating the scale.
Instructions for safely removing and disposing of the lead-acid battery.
Highlights the importance of regular checks for proper operation and calibration.
Guidelines on what to do and not to do when cleaning the scale.
Warning against using sharp objects to operate the keys.
Steps for carefully removing the scale from its package and checking components.
Advice on placing the scale for optimal performance and accuracy.
Instructions on how to level the scale using adjustable feet and a bubble level.
Detailed steps for attaching the support column and indicator to the scale base.
Information on using the scale's internal battery and charging status indicators.
Procedures for turning the scale on and off, including a display test.
Description of the indicator's keypad and LCD display with annunciators.
Explanation of the various symbols and indicators shown on the display.
Details the functions of each key on the scale's front panel.
Lists and explains common error codes displayed by the scale.
Step-by-step guide for performing a standard gross weight measurement.
Instructions for performing net weighing, including taring a container.
How to remove a previously set tare value from the scale.
Overview of the scale's counting functionality for sampling and counting parts.
Detailed steps for setting up and performing part counting using a sample.
Explains the checkweighing function for verifying items against acceptable weight limits.
Procedure for configuring upper and lower limits and beeper modes for checkweighing.
Describes the three available beeper modes for checkweighing feedback.
States that hold mode is not available on this model.
Introduces the User Menu for configuring scale operating modes and diagnostics.
Explains navigation within the User Menu and key functions.
Detailed descriptions of each User Function (UF-1 to UF-9).
Introduces the Supervisor Menu for system parameters and calibration.
Details how to navigate the Supervisor Menu.
Explains each Supervisor Function (LF-1 to LF-8).
Introduces the menu for performing quick calibration procedures.
Describes how to navigate the Quick Calibration Menu.
Details the three Quick Calibration functions (ECF-1, ECF-2, ECF-3).
Information on the calibration switch and access to calibration menus.
Outlines prerequisites for calibration, including configuration and linearity.
Default settings for calibration in kg, including Legal-for-Trade.
Requirements for legal-for-trade applications and sealing the indicator.
Part number for the ZM110 indicator unit.
Part number for the replacement lead-acid battery.
Part number for the RS232 communication kit.
Part number for the power supply unit with adaptors.
Part number for Australian plug adaptors.
Part numbers for various capacity loadcells.
Part number for a specific 500kg loadcell.
Part numbers for different sizes of stainless steel top pans.
Part number for the adjustable column bracket.
Part number for the foot kit.
Pinout details for the loadcell connector on the indicator.
To Next Page