Need help?Do you have a question about the AVIRE E-MOTIVE ATOM ATOM01-104-7-40-940 and is the answer not in the manual?
Details on connecting the ATOM display and its components.
Specifies power input connector types and pin assignments.
Describes MKCAN signal input/output connector types and pins.
Details emergency power input connector and pinout.
Specifies audio connector types and pin assignments.
Lists USB connector types and mating connectors.
Details HDMI connector types and cable requirements.
Specifies LAN connector type and mating connector.
Describes network status LEDs and dipswitch functions.
Explains power status LED and reset button.
Details 5V power output connector and pin assignments.
Details 12V power output connector and pin assignments.
Describes EMD input signal connector and pins.
Guide for physically mounting the ATOM display unit and related parts.
Describes the network architecture using an encoder for elevator systems.
Illustrates the network setup using a Navigation Box for elevator floor positioning.
Steps for configuring the ATOM display with lift controllers.
Wiring and setup for connecting E-Motive encoders via serial interface.
Configuration steps for the Navigation Box using MKCANBus protocol.
Initial power-on sequence and layout presentation for the ATOM display.
How to access and use the ATOM display's on-board menu for settings.
Detailed explanation of the configurable options available in the ATOM display's menu.
Comprehensive technical details and specifications for ATOM display models.
To Next Page
General