Need help?Do you have a question about the AVIWEST AIR Series and is the answer not in the manual?
General| Video Inputs | HD-SDI |
|---|---|
| Video Outputs | HD-SDI, HDMI |
| Supported Protocols | RTMP, HLS |
| Encoding | H.264 |
| Management | SNMP |
| Connectivity | Ethernet, Wi-Fi, Cellular (4G/LTE) |
Guidelines for safe handling to prevent injury and damage.
Precautions to avoid interference with other electronic devices.
Lists specific safety and health warnings for unit operation.
Guidelines for unit servicing and battery safety precautions.
Specifies environmental conditions and precautions for optimal unit operation and warranty.
Introduces the AIR Series encoders and transmitters for video professionals.
Identifies and describes the main components on the unit's front panel.
Identifies and describes the connectors and slots on the rear panel.
Details the USB 3.0 ports located on the unit's sides.
Explains the status and meaning of the unit's indicator lights.
Lists the items expected in the product package for verification.
Step-by-step instructions for physically setting up the unit.
Lists the main operations controllable from the unit's front panel.
Illustrates the menus accessible from the unit's front panel.
Explains the meaning of various icons displayed on the unit's front panel screen.
Steps to access the unit's web interface via an Ethernet connection.
Instructions to connect to the unit's web interface when it acts as a WiFi Access Point.
Explains the different Ethernet modes (DHCP, Static, Gateway) and their configurations.
Steps to configure the Ethernet interface using the unit's front panel controls.
How to enable or disable the unit's WiFi network.
Steps to configure the WiFi interface using the unit's front panel.
Instructions for configuring the unit to operate as a WiFi Access Point using the unit panel.
Instructions for configuring the unit as a WiFi Access Point using the web interface.
Steps to configure the unit to connect to an existing WiFi network as a client via the unit panel.
Steps to configure the unit as a WiFi client using the web interface.
Instructions for correctly inserting the SIM card into the unit.
How to assign SIM card slots to the unit's modems.
Steps to configure the Access Point Name (APN) using the unit's front panel.
Steps to configure the Access Point Name (APN) using the web interface.
Instructions for adding new APN settings to the unit's database.
How to remove an APN entry from the unit's database.
How to enable or disable the automatic APN configuration feature.
How to set the unit to automatically select the cellular operator.
Steps to enable automatic cellular operator selection via the web interface.
How to scan for available operators and select one manually using the unit panel.
How to scan for available operators and select one manually using the web interface.
How to manually set the MCC and MNC for cellular operator selection via the web interface.
Steps to configure modem bands using the standard mode on the unit panel.
Steps to configure modem bands using the expert mode on the unit panel.
Steps to configure modem bands using the standard mode on the web interface.
Details on setting Network Mode and Preset for modem bands via the web interface.
Steps to configure modem bands using expert mode on the web interface, including band selection.
Explains how to set and manage priority levels (High/Low) for network links.
Steps to name the unit for easy identification via the unit panel.
Steps to name the unit for easy identification via the web interface.
Instructions to set the unit's time and date using the unit panel and web interface.
Steps to select the user interface language via the unit panel and web interface.
How to enable or disable the unit's location tracking via the unit panel and web interface.
How to configure the unit to start a Live stream automatically upon startup via the unit panel and web interface.
How to enable or disable the screensaver function using the unit panel and web interface.
Lists available video source options including Auto, SDI, HDMI, and Pattern.
Steps to select the video source using the unit's front panel.
Steps to select the video source using the web interface.
Details the two audio source options: From Video and Analog (Balanced).
Steps to select the audio source and adjust its level using the unit panel.
Steps to select the audio source and adjust its level using the web interface.
Guidelines and specifications for configuring Live profiles, including latency, bitrate, and resolution.
Step-by-step instructions for creating a new Live Profile using the unit panel.
Step-by-step instructions for creating a new Live Profile using the web interface.
Instructions to delete a Live Profile using the unit panel.
Instructions to delete a Live Profile using the web interface.
How to select a pre-defined Live Profile using the web interface.
Step-by-step instructions for creating a new Record Profile using the unit panel.
Step-by-step instructions for creating a new Record Profile using the web interface.
Instructions to delete a Record Profile using the unit panel.
Instructions to delete a Record Profile using the web interface.
How to select a pre-defined Record Profile for Live and Record operations via the web interface.
Step-by-step instructions for creating a new Destination Profile using the unit panel.
Step-by-step instructions for creating a new Destination Profile using the web interface.
Details on configuring advanced settings for Destination Profiles via the web interface.
Instructions to delete a Destination Profile using the unit panel.
Instructions to delete a Destination Profile using the web interface.
How to select a pre-defined Destination Profile using the web interface.
Steps to enable/disable AES encryption and configure the AES key using the unit panel.
Steps to enable/disable AES encryption and configure the AES key using the web interface.
How to configure forward settings like Resume at Startup, Auto-Erase, and Hot Folder using the unit panel.
How to configure forward settings like Resume at Startup, Auto-Erase, and Hot Folder using the web interface.
How to enable or disable individual cellular modems using the unit panel.
How to enable or disable individual cellular modems using the web interface.
How to enable or disable all internal cellular modems simultaneously via the unit panel.
How to enable or disable all internal cellular modems simultaneously via the web interface.
How to enable or disable all QUAD CellLink modems simultaneously via the unit panel.
How to enable or disable all QUAD CellLink modems simultaneously via the web interface.
Steps to select a mission using the unit panel, including viewing mission information.
Steps to change the currently selected mission using the unit panel.
Steps to select a mission and view its description using the web interface.
Steps to change the selected mission using the web interface.
How to emit a video return feed from the unit to a StreamHub.
How to check if the unit is receiving a video stream and connect a display via HDMI.
Step-by-step guide to manually start a Live stream using the unit panel controls.
Explains the indicators displayed during a Live operation like bitrate, duration, and SD card status.
Instructions on how to stop the Live stream from the unit panel.
How to start a Live stream and check its status and indicators via the web interface.
Instructions on how to stop the Live stream from the web interface.
Step-by-step guide to manually start a recording using the unit panel controls.
Explains the indicators displayed during a recording like duration, SD card status, and network bitrate.
Instructions on how to stop the recording from the unit panel.
How to start a recording and check its status and indicators via the web interface.
Instructions on how to stop the recording from the web interface.
How to initiate forwarding of the last record, selected files, or all files using the unit panel.
How to initiate forwarding of records using the web interface.
Explains the Hot Folder function for automatic file transmission over unmanaged networks.
How to enable or disable the Hot Folder function using the unit panel.
How to enable or disable the Hot Folder function using the web interface.
Steps to connect a headset/microphone and manage intercom settings via the unit panel.
Steps to manage intercom settings by adjusting microphone and headset levels via the web interface.
Steps to configure the unit in Data Bridge mode, selecting a destination and enabling the mode via the unit panel.
Steps to configure the unit in Data Bridge mode via the web interface.
Overview of locking/unlocking a unit via the Manager interface and its limitations.
How to view unit information like Product ID, Name, and Firmware version via the web interface.
How to view unit information like Product ID, Name, and Firmware version via the unit panel.
Steps to retrieve the unit's IMEI, IMSI, and ICCID numbers using the unit panel.
Steps to retrieve the unit's IMEI, IMSI, and ICCID numbers using the web interface.
How to test Live encoding using a pattern generator and verify communication with the StreamHub.
Instructions to change the password for accessing the web interface.
Steps to update the unit's firmware using an SD card or USB key via the unit panel.
Steps to update the unit's firmware using a firmware file via the web interface.
How to reboot the unit and restore it to factory default settings.
How to export the unit's current configuration settings to a file.
How to import unit configuration settings from an SD card or USB key via the unit panel.
How to import unit configuration settings from a file via the web interface.
Steps to unlock a SIM card using its PIN code via the unit panel.
How to delete files from the SD card, including specific files, all files, or hot folder files, using the unit panel.
How to delete files from the SD card via the web interface.
Steps to format the SD card using the unit panel, ensuring it is FAT32.
How to obtain a report file from the web interface for troubleshooting.
How to obtain a report file from the unit panel for troubleshooting.
How to download and export report files from the unit's history.
Lists common alarm messages and their corresponding solutions for troubleshooting.
Provides further alarm messages and their solutions for resolving issues.
Details technical specifications related to video encoding and standards.
Technical specifications for audio processing and video return features.
Technical specifications for cellular networks (3G/4G/5G) and Ethernet connectivity.
Technical specifications for WiFi functionality and end-to-end latency.
Details on connectors, impedance, and compliance for various interfaces.
Technical specifications for intercom, LAN/WAN, storage, and power interfaces.
Details on power supply, consumption, dimensions, and weight of the unit.
Specifies operating/charging temperatures and radiated output power for various bands.
Instructions for proper disposal of the product according to regulations.
Provides contact details for AVIWEST global headquarters and regional offices.
To Next Page
