20
6. Under “SSID” select the name of the desired WiFi network you wish to connect to and choose the
respective encryption and cipher modes via the “Security” and “Cipher” tabs according to the settings
of your WiFi network. For details, which encryption and cipher mode you need to select, please refer to
the settings menu of your WiFi router or consult your network administrator.
7. Select the “Password” tab, enter your WiFi key and confirm by selecting “Done” in the upper-right
corner of the RC S App. Confirm your WiFi configuration data you just entered by selecting “Apply” in
the upper-right corner.
8. Choose an IP configuration setting from the pop-up menu and confirm by selecting “Apply”.
NOTE: Unless your local network is not set up with fixed IP addresses, it is highly recommended to
enable the DHCP option.
To Next Page
Loading...
Need help?
General