AVM FRITZ!DECT 200 - Help in Case of Errors; No Connection to FRITZ!Box; Socket Switched Off

No Connection to FRITZ!Box
The DECT LED ashes briey at regular
intervals.
1. Insert FRITZ!DECT into an outlet near
your FRITZ!Box.
2. When the DECT LED lights up, the
pre vious outlet is located outside the
range of the FRITZ!Box, or the wireless
connection is faulty.
Typical sources of interference include
closed doors and zones with high
humidity (damp walls, clothes drying
racks).
If the outlet is outside the range of
the FRITZ!Box and needed there,
use a FRITZ!DECT Repeater.
If the DECT LED continues ashing,
FRITZ!DECT200 is not registered with the
FRITZ!Box. Register FRITZ!DECT200 again.
Socket Switched O
The On/O LED ashes briey at regular in-
tervals and the connected electrical device
does not work. The socket is switched o.
1. Remove the electrical device from the
FRITZ!DECT200 socket.
2. Press the On/O button. The socket is
switched back on.
The On/O LED lights up.
3. Insert the electrical device back into
FRITZ!DECT200.
Help in Case of Errors
14