AVM FRITZ!DECT 200

To Next Page

To Previous Page

Security

Do not subject FRITZ!DECT200 to a load higher than its limit of 2300W/10A (ohmic

load). Overloading can damage FRITZ!DECT200, or cause malfunctions or an

electrical accident.

• Only use FRITZ!DECT200 indoors.

• Operate FRITZ!DECT200 only in a dry location that is free of dust, protected from direct

sunlight, and well ventilated.

• Insert FRITZ!DECT200 into an electrical outlet that is easy to reach.

• Do not insert FRITZ!DECT200 into another FRITZ!DECT200.

• Do not operate any devices that present a risk of re (for instance, electric irons, radiant

heaters) on FRITZ!DECT200.

• Never let liquids get inside FRITZ!DECT200.

• Do not modify FRITZ!DECT200. FRITZ!DECT200 may not be opened, converted, modied

or repaired except by a qualied technician.

• Congure automatic switching for FRITZ!DECT200 only if the connected devices are

designed for such operation. Frequent switching can shorten the service life of electrical

devices. No liability will be accepted for attendant damage to corresponding devices.

AVM FRITZ!DECT 200 - Security