AVM FRITZ!DECT 200 - Registering with a FRITZ!Box

Registering with a FRITZ!Box
1. Insert FRITZ!DECT200 into an outlet near your FRITZ!Box.
The DECT LED ashes regularly.
2. Within 2minutes, press the DECT button on your FRITZ!Box, until the Info or DECT LED
starts ashing.
FRITZ!DECT200 is registered with the FRITZ!Box. The wireless connection has been
established when the DECT LED on the FRITZ!DECT200 lights up.
If the DECT LED continues to ash, registration was not successful. Remove
FRITZ!DECT200 from the power outlet and repeat the registration process.
3. Now insert FRITZ!DECT200 into the socket where you would like to use the device.
FRITZ!DECT automatically reregisters with the FRITZ!Box. When the connection has been
established, the DECT LED lights up.
If the DECT LED keeps ashing, try to register from a dierent outlet closer to the
FRITZ!Box. The outlet must be located within the range of the DECT radio network of
the FRITZ!Box.
6