Specification
Measuring Ranges:
Single wire mode 0 to 199,9 Amp
2-or-3-wire mode 0 to 40,0 Amp
Resolution: 0,1 Amp.
Accuracy: At 22˚C (72˚F) and rated frequency
Single wire
2% of reading ± 2 digits
2-or-3-wire mode
Flat or Twin cable 5% of reading
± 2 digits
.
Round Cable 12% of reading
± 2 digits
.
Calibration at 12 month intervals is recommended
Temperature Range: -0˚ - 40˚C (32˚F - 104˚ F)
Humidity Range: 0% to 95% RH
Power Supply: 1 x PP3 - 9V battery (IEC 6LR61 type)
Battery life: Typically 50 hours continuous use or 20
weeks of normal daily use.
L o w Battery Indicator: when battery voltage falls
below 7 V.Remove the battery if the instrument is likely to remain
unused for an extended period of time.
Battery Replacement: The battery cover can be released by the
insertion of a screw-driver (as shown below).Lever up and remove the
battery cover. Replace the exhausted battery, and slide the cover on
securely.
To replace SLIDE into position
Safety: The instruments meet the requirements for double insulation to
IEC 1010-2-032, EN61010-2-032 to Category I I I*, 1000 Volts on
insulated cable. (*Relates to transient overvoltage likely to be found in
fixed installation wiring).
E.M.C: The instrument meets EN 50081-1 and EN 50082-1 (1992)
Case Dimensions: 110mm x 229mm x 45mm (4
1
⁄3”x 9”x 1
3
⁄4”)
Max.Jaw Opening: 25,4mm (1”)
Weight: 315g (11oz) including batteries
Cleaning: Wipe disconnected instrument with a clean cloth damped
with soapy water or Isopropyl Alcohol (IPA).
Accessories
Supplied Part Number
User Guide 6172-215
Carrying pouch with belt loop 8101-101
Avo Megger FlexiClamp 200 28/5/99 11:25 am Page 4
To Previous Page
Loading...
Need help?
General