22 Cyclades ACS 5000 Installation/Administration/User Guide
[
Figure 3.4: IPDU Power Mgmt. - Outlets Manager - Show Outlets Screen
To view status, lock, unlock, rename or cycle power outlets:
NOTE: For a group of outlets, the Cycle button operates only if all outlets of the group are turned ON.
1. Select IPDU Power Mgmt. - Outlets Manager. The Outlets Manager screen appears.
2. Click the Show button for the IPDU whose outlets you want to manage. A list of outlets
appears.
3. To switch an outlet (or an outlet group) on or off, click its light bulb icon.
NOTE: For Avocent SPC power devices or Server Technology IPDUs, a dialog box prompts you that you may
need to refresh your browser to view the change in the Outlets Manager. Click OK and continue.
4. To lock or unlock an outlet (or an outlet group), click its padlock icon.
NOTE: The outlet locking function is available on Cyclades IPDUs only.
5. To cycle power to an outlet, click the adjacent Cycle button.
Table 3.3: IPDU Power Mgmt. - Outlets Manager Icons and Buttons
Button Purpose
Yellow bulb - Outlet is ON
Gray bulb - Outlet is OFF
Closed padlock - Outlet is locked
Open padlock - Outlet is unlocked
Outlet is ON
Displays a dialog box to configure an Outlet Name and Post On Delay. Outlet names
must begin with a letter. Valid characters are letters, numbers, dash (-) and underscore
(_). The post on delay is the amount of time (in seconds) that elapses after the selected
outlet is turned on before another outlet is turned on.
To Next Page
Loading...
