24 Cyclades ACS 5000 Installation/Administration/User Guide
IPDU Power Mgmt. - Outlets Group Ctrl
If you select IPDU Power Mgmt. - Outlet Groups Ctrl, you can view the status of outlet groups and
turn power off and then on again for an entire group of outlets, if outlet groups have been defined
and if you are authorized to control them.
Figure 3.5: IPDU Power Mgmt. - Outlet Groups Ctrl
The same icons shown in Table 3.3 on page 22 appear on this screen. The Cycle button only can be
used to cycle the entire group of outlets and only when all the outlets are on.
Security
If you select Security, you can configure your password.
To change your password:
1. Select Security. The Security screen appears.
2. Enter your current password in the Current Password field.
3. Enter the new password in the New Password and the Repeat New Password fields.
4. Click OK.
Threshold Max The maximum current that can be reached before an
alarm is initiated or the buzzer sounds, or both.
20.0 A
Max Detected The recorded maximum current reported by this IPDU
(which may include transients).
1.3 A
Table 3.4: IPDU Power Mgmt. - View IPDUs Info Description (Continued)
Screen Heading Description Example
To Next Page
Loading...
