Chapter 4: Web Manager for Administrators 27
The Web Manager buttons to try, save and cancel configuration changes are summarized in the
following table.
Overview of Administrative Modes
The console server Web Manager operates in one of two modes, Wizard or Expert.
Wizard mode
The Wizard mode guides the administrator through five configuration steps.
The following is a typical screen of the console server web interface in Wizard Mode. The user
entry screen varies with the selected menu option. The Expert button appears in Wizard mode.
apply changes Applies and saves all unsaved changes to the Flash memory
reload page Reloads the page.
Help Displays the online help.
next Only appears in Wizard mode; goes to the next screen.
no unsaved changes Button appears and a graphical LED appears in green when no changes
have been
made that need to be saved.
unsaved changes Only appears if the current user has made changes and has not yet saved
them.
Appears instead of the no unsaved changes button. The graphical
LED blinks red.
Table 4.3: Administrator - Options for Trying, Saving and Restoring Configuration Change
Bu
tton Use
try changes Click this button to update the appropriate configuration files. Changes are preserved if you
log in and log out and even if you restart the system. Changes stay in effect unless the
cancel changes button is clicked. The changes can be restored at any time until the apply
changes button is clicked.
cancel changes Click this button to restore the configuration files from a previously created backup, which
was created the last time changes were applied.
apply changes If try changes has not been previously clicked, click this button to update the appropriate
configuration files. Overwrites the backed up copy of the configuration files.
Table 4.2: Administrator Web Manager Buttons (Continued)
Button name Use
To Next Page
Loading...
