Chapter 6: Web Manager Applications Menu Options 43
Applications - PMD Configuration- General
An administrator can select Expert - Applications - PMD Configuration - General to configure a
username and password for each supported IPDU type. The areas on the screen are labeled:
Cyclades (for Cyclades PM IPDUs), SPC (for Avocent SPC power devices) and Server Tech (for
supported Server Technology IPDUs). The username and password are used to authenticate
communication between the console server and the IPDU. If the IPDU username and password are
changed in the IPDU firmware, the username and password must be changed in this screen so the
console server can use the correct username and password to communicate with the IPDU.
Figure 6.6: Applications - PMD Configuration - General
Applications - PMD Configuration- Outlet Groups
An administrator can select Expert - Applications - PMD Configuration - Outlet Groups to
configure outlet groups.
Figure 6.7: Expert - Applications - PMD Configuration - Outlet Groups Screen
Any configured outlet groups are listed in the Group column, followed by the string used to
identify the group during configuration (in the form IPDU_ID[outlets] as shown). The Add, Edit
and Delete buttons are used to configure the outlet groups.
To Next Page
Loading...
