Chapter 6: Web Manager Applications Menu Options 45
The listed users are authorized to access and control the outlets specified under the Outlets heading.
To authorize a user for IPDU power management:
1. Select Expert - Applications - PMD Configuration - Users Management.
2. Click Add. Add/Edit PM Users dialog box appears.
3. In the User field, enter the username.
4. In the Outlets field, enter the group name, IPDU number and outlets that the user can control.
5. Click OK.
Expert - Applications - Terminal Profile Menu
An administrator can select Expert - Applications - Terminal Profile Menu to configure a terminal
command menu. This menu is used if a terminal is connected to one of the serial ports and the serial
port is configured as a local terminal. A connection to a serial port configured as a local terminal
launches a session on the terminal with access to the Linux commands on the console unless you
configure a menu here.
Figure 6.9: Expert - Applications - Terminal Profile Menu
The menu can contain any command recognized by the Linux operating system on the console
server. The most common use of this feature is to create multiple menu options for launching SSH
sessions on several remote hosts.
For example, you can create a menu called SSH to Servers with options that launch SSH
connections to several servers, as shown in the following example.
To Next Page
Loading...
