Chapter 7: Web Manager Network Menu Options 59
To configure static routes [Expert]:
1. Select Expert - Network - Static Routes. The Static Routes screen appears.
• To edit a static route, select a route from the Static Routes list and then click Edit.
• To add a static route, click Add. The New/Modify Route dialog box appears.
2. Choose Default, Network or Host from the Route pull-down menu.
3. If you selected Network, perform the following steps.
a. Enter the IP address of the destination network in the Network IP field.
b. Enter the netmask of the destination network in the Network Mask field.
4. If you selected Host, enter the IP address of the destination host in the Host IP field.
5. Select Gateway or Interface from the Go to pull-down menu and enter the address of the
gateway or the name of the interface in the adjacent field.
6. Click apply changes.
Go to Options are Gateway or Interface. Enter the IP address of the gateway or
the name of the interface in the adjacent field.
Metric Enter the number of hops to the destination.
Table 7.5: Route Type Fields in the New/Modify Route Dialog Box (Continued)
Field
or Menu Name Definition
To Next Page
Loading...
