Avocent Cyclades ACS 5000 - Enable Serial Ports

16 Cyclades ACS 5000 Advanced Console Server Command Reference Guide
2. Enable or disable desired protocols or services. Refer to Table 2.5 for the list of parameters
and values.
custom> [parameter] <value>
3. Activate and save your configuration.
Enable serial ports
By default, the console server is configured with all serial ports disabled.
To enable serial ports:
1. Enable single or multiple serial ports.
cli> config physicalports <range/list[1-32]> enable yes
Table 2.5: Custom Security Profile Parameters
Parameter Level1 Parameter Level2 Parameter Level3 Value
ftp yes|no
icmp yes|no
ipsec yes|no
ports> auth2
bidirect
raw2sport
ssh2sport
telnet2sport
yes|no
yes|no
yes|no
yes|no
yes|no
rpc yes|no
snmp yes|no
ssh> root_access
ssh_x509>
sshd_port
sshv1
sshv2
CA_file
hostkey
authorizedkeys
yes|no
<path and filename of CA certificate>
<path and filename of authorized keys>
<number>
yes|no
yes|no
telnet yes|no
web> http
http2https
http_port
https
https_port
yes|no
yes|no
<number>
yes|no
<number>