Chapter 4: Accessing Connected Devices 61
Configuration examples
Console Access Server (CAS) profile
With the console server set up as a CAS profile, you may access a connected server’s serial console
port from a workstation on the network. There is no authentication by default, but the system may
be configured for an authentication server such as Radius, LDAP or a local database.
Figure 4.1 displays an example of a CAS environment, and descriptions follow in Table 4.9. This
configuration example has local authentication and serially connected workstations.
Table 4.8: ts_menu Configuration Parameters
Parameter Value Description
consolename <consolename> Name of the serial port to which you need to connect.
list To display a list of the available serial ports.
readonly To connect to the console of a server in read-only mode.
Add the serial port name parameter:
cli> applications connect readonly consolename <consolename>
To Next Page
Loading...
