Chapter 4: Accessing Connected Devices 65
Figure 4.3: Example of TS Configuration Profile
To test a TS configuration:
1. Create a new user in the local database.
# adduser <username>
# passwd <username>
2. Create a new test user and password on the server.
3. From the console, ping the server to make sure it is reachable.
Table 4.11: Example of TS Configuration Profile Descriptions
Item Description Item Description
1 Terminals on Serial Port (dumb terminal or
workstation running terminal application)
5 Ethernet Hub or Switch
2 Cyclades ACS 5000 Console Server 6 Ethernet Router
3 Power Cable 7 Remote Servers
4 Ethernet CAT 5 Cable
To Next Page
Loading...
