13
CHAPTER
2
Installation
You can mount the ACS 6000 console server on a rack or cabinet or place it on a desktop or other
flat surface. For rack or cabinet mounting, two mounting brackets are supplied with six hex screws
to connect the brackets to the console server.
Figure 2.1: Bracket Connections for Front Mount Configuration
Mount the Console Server
To rack mount the console server:
You need a Phillips screwdriver, the mounting brackets and supplied screws, and the appropriate
nuts and bolts to connect the mounting brackets to the rack.
1. Install the brackets at the front or back edges of the ACS 6000 console server with the screws
provided with the mounting kit.
2. Mount the console server in a secure position.
To Next Page
Loading...
