33
CHAPTER
4
Configuring Network Settings and
SNMP
Network Configuration Options
Select Application Settings - Network to display the following options in the left navigation bar:
•IPv6
• Devices
• Bonding
• Static Routes
•Hosts
IPv6
An administrator can select Appliance Settings - Network - IPv6 to enable and configure IPv6.
To configure IPv6:
1. Select Appliance Settings - Network - IPv6. The IPv6 screen appears.
2. Click Enable IPv6 to configure the console server for IPv6 protocol operation.
3. Click Get DNS from DHCPv6 to obtain the Domain Name Server IP address from the DHCP
server.
4. Click Get Domain from DHCPv6 to obtain the domain name from the DHCP server.
5. Click Save. An alert window displays the notice, Enabling or disabling IPv6 requires reboot to
be effective. Click OK. The login screen appears when the reboot is complete.
Devices
An administrator can select Appliance Settings - Network - Devices to enable and configure the IP
addresses assigned to the network interfaces and view the MAC address. Besides the two standard
Ethernet interfaces, the list of network interfaces includes entries for any Ethernet PC cards that
may be installed.
To configure a network device:
1. Select Appliance Settings - Network - Devices. The Devices screen appears with a list of
network interfaces and their status (enabled or disabled).
To Next Page
Loading...
