Chapter 7: Ports Configuration 57
a. To allow PPP callback connections only, select Callback.
b. To allow any connection, select Enable.
5. When the PAP authentication protocol is configured for the port, select the authentication type
from the PPP/PAP Authentication menu.
6. Click Save.
To configure callback users and phone numbers for ports with Dial-In profile:
1. Select Appliance Settings - Ports - Dial-In Profile - Secure Dial-In - Callback Users. The
Callback Users screen appears.
2. Click Add.
3. Enter the name used to perform the callback in the Callback Users field.
4. Enter the phone number to call in the Callback Number field.
5. Click Save.
To configure PPP OTP users for ports with Dial-In profile:
1. Select Appliance Settings - Ports - Dial-In Profile - Secure Dial-In - PPP OTP Users. The PPP
OTP Users screen appears.
2. Enter the username in the PPP OTP User field.
3. Enter the passphrase in the Passphrase and Confirm Passphrase fields.
4. Click Save.
Power Profile
An administrator can select Appliance Settings - Ports - Power Profile to configure ports that are
connected to PDUs and that are configured with the Power Profile.The Power Profile option has the
two options described in the following table.
To configure a changed PDU password for ports with Power profile:
1. Select Appliance Settings - Ports - Power Profile - Login. The Login Screen appears.
2. To change the password for a Cyclades PM PDU, enter the password in the Cyclades PDU
section.
3. To change the password for an Avocent SPC PDU, enter the password in the SPC PDU section.
Table 7.4: Power Profile Options
Option Description
Login If the login password is changed on a PDU of a certain type (Cyclades, SPC or ServerTech),
the administrator can optionally change the login password on this screen. This password is
used by the console server to communicate with the PDU. (Only one password is supported
for all PDUs of the same type.)
Outlet Group Configure groups of outlets.
To Next Page
Loading...
