Chapter 4: Using the Web Manager 39
To manage pluggable devices:
1. Select Application Settings - Pluggable Devices. The Pluggable Devices screen appears.
2. Select the checkbox next to the pluggable device you wish to configure, or select the checkbox
above the list of pluggable devices to select them all.
3. Click Insert All, Eject or Rename.
To view and change pluggable device information:
1. Select Application Settings - Pluggable Devices. The Pluggable Devices screen appears.
2. Select a pluggable device name.
3. If the pluggable device type is Network, the Network/Device section will be visible to allow
the configuration of the network parameters.
-or-
If the pluggable device type is Modem (V.92 or wireless), the Dial-in/Device section will be
visible to allow the configuration of the dial-in parameters.
Security Configuration
Security profiles determine which network services are enabled on the console server.
During initial configuration, the console server administrator must configure security parameters to
conform with the site security policy. The security parameters can be modified later. The following
security features can be configured either in the Web Manager or the CLI:
• Enable or disable automatic detection of PC cards and USB devices
• Enable or disable RPC
• Either allow all users to access enabled ports or allow the configuration of group authorizations
to restrict access
• Select a security profile, which defines:
• Which services (FTP, ICMP, IPSec and Telnet) are enabled
• SSH and HTTP/HTTPS access
The administrator can select either a preconfigured security profile or create a custom profile.
All the services and the SSH and HTTP/HTTPS configuration options that are enabled and disabled
for each security profile are shown in the First Time Configuration window, the Appliance Settings
- Security - Security Profile window and the CLI show command list.
To Next Page
Loading...
