AVR 30 Series - Introduction to Series 30 Hydrants; Standards Compliance; Product Variants; Hydrostatic Testing

1. Introduction
IT IS IMPORTANT TO STATE OPERATING TEMPERATURE, PRESSURE, MEDIUM AND OPERATING CONDITIONS WITH
ENQUIRIES/ORDERS, SO THE MOST SUITABLE VALVE WILL BE SUPPLIED FOR YOUR SPECIFIC PURPOSE.
AVK Valves Pty Ltd - 559A Grand Junction Road, Wingfield, SA 5013, Australia - Tel: +61 8 8368 0900 - Email: info@avkvalves.com.au - www.avkvalves.com.au Version number 2
COPYRIGHT©AVK GROUP A/S 2017
SERIES 30 HYDRANT
INSTALLATION, OPERATION & MAINTENANCE MANUAL
Refer to individual datasheets for specific information
QLD, NSW, VIC, TAS
Series 30/00 Spring Hydrant
Series 30/10 Spring Hydrant (Swab Type)
Both series available with blue yoke for potable water or purple yoke for recycled water
The valves are 100% factory tested hydrostatically.
A
VK series 30 hydrants are designed to meet local specifications and include:
Standards Mark Compliance - According to AS3952-2020
AVK Australia Holdings Pty Ltd - 559A Grand Junction Road, Wingfield, SA 5013, Australia - Tel: +61 8 8368 0900 - Email: enquires@avkau.com.au - www.avkcivil.com.au Version number 2
COPYRIGHT©AVK GROUP A/S 2017 Pg 2
Series 30/00