AVS Electronics SPIDER PA - Page 34

- 34 -
SPIDER PA WS Terminals
SPIDER PA WS Jumper
S3
MID
MAX
LOW
MAX
LOW
MID
MAX
LOW
MID
S1
S2
NOTE: Ranges shown
in the chart are referred
to detector with botton
mirror in position 1
(max. range).
TAMPER
On the electronic board
there are two terminals (T
T - TAMPER) The two
terminals on the board are
used for tamper signalling,
they must be connected to
the tamper module given
within the detector.
If they are not used a bridge
between them must be
made.
REPMUJ
1S
FOEGNAR
RIPMOTTOB
XAM
)tluafeD(
sretem41.egnarxam
DIM sretem01:egnarmuidem
WOL sretem7:egnar.nim
2S
FOEGNAR
RIPPOT
XAM
)tluafed(
sretem41.egnarxam
DIM sretem01:egnarmuidem
WOL sretem7:egnar.nim
3S
FFO/NODEL
NO
FFO
sideldetcennocegdirbhtiw
no
deldetcennocsidegdirbhtiw
dedulcxesi
E
N
G