Avtech Room Alert S User Manual

AVTECH Software, Inc. Page 32 AVTECH.com
Room Alert S Models (RA32S-DAP-RAS & RA12S-DAP-RAS)
congured to use. The default is HMAC MD5 authentication protocol.
• In Authentication Password, enter the authentication password that’s congured in
your SNMP monitoring program.
• In Privacy Password, enter the privacy password that’s congured in your SNMP
monitoring program.
3. Select Save Settings at the top or bottom of the page. Your Room Alert will
automatically reboot and commit your changes.
SNMP Trap Sending Conguration
You may congure your Room Alert to send SNMP Traps in response to a change in alarm
state to up to three host systems running 3rd-party SNMP monitoring applications. Each host
system you enter in these elds will receive the same SNMP Traps simultaneously.
To congure your Room Alert to send SNMP Traps:
1. In Trap Send IP 1, enter the IP address of the host system that runs your 3
rd
-party
SNMP monitoring application.
2. In Trap Send IP 2 and Trap Send IP 3, you may enter the IP addresses of other host
systems that run 3
rd
-party SNMP monitoring applications, or leave the default, 0.0.0.0.
3. Select Save Settings at the top or bottom of the page. Your Room Alert will
automatically reboot and commit your changes.

Avtech Room Alert S Specifications

General

Brand	Avtech
Model	Room Alert S
Category	Measuring Instruments
Language	English