Need help?Do you have a question about the AW 375 and is the answer not in the manual?
General| Brand | AW |
|---|---|
| Model | 375 |
| Category | Measuring Instruments |
| Language | English |
Important safety precautions for operating the dynamometer, including driveline safety, noise protection, and electrical hazards.
Details the water flow rates needed for continuous dynamometer operation based on horsepower.
Outlines essential steps for preparing and setting up the dynamometer, including shaft selection and securing the unit.
Guides on connecting water inlet/outlet hoses, checking water volume, and filling the dynamometer system.
Details the procedure for starting the dynamometer test, including valve operations and engaging the PTO.
Explains how to apply load, stop the test, and measure torque rise using the 2100S computer.
Details the process of inspecting, draining, and replenishing the synthetic oil in the brake drum unit.
Lists common operational problems such as vibration, no load, low power, overheating, and smoke.
Addresses issues like low/high power readings, erratic loading, and overheating, providing causes and remedies.
Covers troubleshooting for sheared pins, seal damage, smoke, and unstable readings, with detailed remedies.
To Next Page