To Next PageTo Next Page
Need help?Do you have a question about the AWG FD Z2 and is the answer not in the manual?
General| Brand | AWG |
|---|---|
| Model | FD Z2 |
| Category | Industrial Equipment |
| Language | English |
Details design and construction compliance with relevant directives and harmonised standards.
Prohibits unauthorised modifications and states liability for damages caused by them.
Lists this manual as the primary document for safe handling, with data sheets available online.
Outlines usage rights and restrictions for the operating manual, subject to technical changes.
Explains symbols used in the manual, including DANGER, WARNING, and CAUTION signals.
Defines DANGER, WARNING, and CAUTION signals with their associated risk levels and potential injuries.
Explains IMPORTANT and INFORMATION boxes, their purpose, and how to interpret text references to figures.
Describes the purpose of illustrations, how to interpret item references in text, and representation variations.
States the device must be operated correctly, operators must be trained, and unauthorized modifications are prohibited.
Emphasizes observing safety rules, preventing damage during use, and adhering to country-specific fire service regulations.
Details that operators must be technically qualified and trained, specifying different qualifications for various tasks.
Mandates wearing personal protective equipment as per country-specific fire service regulations during operation.
Explains how inductors feed foam concentrates using Venturi principle and suction, with a check valve.
Lists intended uses, including fighting class A and B fires, and aspirating foam agents or additives.
Lists prohibited actions like using unsuitable agents, modifications, or operating outside approved parameters.
Provides technical specifications like flow rate, pressure loss, operating pressure, and admixing rate for Z2 and Z4 models.
Instructs on checking the delivered inductor for damage and completeness upon unpacking.
Provides guidelines for transporting and storing the inductor safely, ensuring it is secured and clean.
Contains critical safety and usage notes regarding foaming agent product information and handling.
Explains the steps for connecting and using the inductor, including adapter connection and setting sleeve adjustment.
Details visual checks for damage and contamination after each use, emphasizing reporting any found damage.
Outlines requirements for testing, including manufacturer's documentation and defined inspection types (BASIC, STANDARD, ADVANCED).
Details how to perform inspections safely, including observing regulations and wearing PPE.
Describes the basic inspection steps: checking the inductor for damage and the pick tube for contamination.
Specifies the standard inspection procedure, which includes a leak test at 10 bar inlet pressure.
States that apart from visual checks and cleaning, no regular maintenance is required.
Explains that repair work must only be performed by authorized personnel or AWG customer service.
Advises observing local regulations for proper waste recycling and disposal of the inductor.
