The AXCESSABLES DOLLY is an expandable frame A/V production handcart designed for transporting equipment. It features a robust, all-metal construction, ensuring durability and reliability for professional use. The dolly is designed to be versatile, offering both regular and extended payload configurations to accommodate varying amounts of equipment.
Function Description:
The primary function of the AXCESSABLES DOLLY is to provide a portable and sturdy solution for moving audio/visual production equipment. Its expandable frame allows users to adjust the payload area, making it suitable for different job requirements. The dolly can be quickly transformed between a compact, folded state for storage and transport, and an open, operational state with handles raised. It also offers the ability to extend its frame to increase the carrying capacity.
Important Technical Specifications:
- Dimensions (Open/Upright):
- Length: 48 inches
- Height: 40 inches
- Width (Payload Area): 13.5 inches
- Expandable Frame: The frame extends an additional two feet, significantly increasing the payload area.
- Construction: Solid all-metal construction for enhanced durability.
- Wheels:
- Front Caster Wheels: Locking pivoting design for stability.
- Rear Wheels: Large, 9.5-inch diameter, treaded wheels (3.00-4 size) for improved traction and maneuverability, especially on varied terrain.
- Handles: Front and rear handles with locking foot levers for secure positioning.
- Non-Skid Coating: Applied to critical surfaces to prevent equipment from sliding.
- Locking Mechanisms: Features locking pins and wing screws to secure the frame in desired positions (folded, open, extended, retracted).
Usage Features:
- Quick View Parts & Features: The manual provides a clear overview of the dolly's components, including front and rear handles, handle locking foot levers, wing screws, non-skid coating, locking pin, solid all-metal construction, and wheel specifications.
- Raising Dolly Handles (from Folded/Closed Position):
- Raise the Front Handle first and ensure it firmly locks into position.
- Raise the Rear Handle until it locks into position.
- Safety Note: Always double-check that both handles are securely locked before loading and moving the dolly.
- Folding Dolly Handles (from Upright/Open Position):
- Step down on the front Foot Lever #2 and lower the Rear Handle until it locks into its closed position.
- Step down on the rear Foot Lever #1 and lower the Front Handle until it locks into its closed position.
- Prerequisite: The dolly payload frame must be in the fully retracted position before folding down the handles.
- Safety Note: Always double-check that both handles are securely locked into position before loading and moving the dolly.
- Expanding Dolly Payload Area:
- Loosen the two Wing Screws (located on both sides of the frame).
- Pull out the frame until the Locking Pin firmly "clicks" into its designated hole.
- Tighten the Wing Screws to secure the expanded frame.
- Retracting Dolly Payload Area:
- Loosen the two Wing Screws.
- Push IN the Locking Pin and then pull the Front and Rear frames of the dolly together.
- Tighten the Wing Screws.
- Important Note: Be sure to tighten Wing Screws to keep the payload area securely in place when the dolly is in the smaller payload configuration.
- Configurations: Supports both regular and extended payload configurations, allowing for flexibility in carrying capacity.
Maintenance Features:
- Safety Instructions:
- Always lock the front caster wheels when the dolly is not in motion, especially during loading and unloading.
- Ensure the Locking Pin has clicked securely into place in its locking hole before loading equipment onto the dolly.
- Always tighten Wing Screws after any adjustments to the payload capacities to ensure stability and safety.
- California Prop 65 Warning: This product contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Users are advised to wash hands after handling the product.
The AXCESSABLES DOLLY is designed for ease of use, quick configuration changes, and reliable performance in A/V production environments, emphasizing safety through its locking mechanisms and clear operational guidelines.
To Next Page
Need help?
General
