Axis 01796-001 - Page 6

AXISC1310-ENetworkHornSpeaker
Additionalsettings
4.GotoAudio>Systemoverview.
5.Usetheslidersbesideafollowertoadjustthegainforanaudiodevice.
Calibrateandrunremotespeakertest
Thespeakertestisatestthatcanbeinitiatedfromaremotelocationtoverifythatthespeakerisworkingasintended.Formore
information,seeSpeakertestonpage16.
Note
Duringcalibration,itisrecommendedthatsomeoneisphysicallypresentattheinstallationsitetolistentothetesttonesand
ensurethatthetesttonesarenotmufedorblockedbyanyunintendedobstructionsinthespeaker’sacousticpath.
Calibratetheaudiodevice:
1.GotoAudio>Devicesettings.
2.ClickCalibratetocalibratetheaudiodevice.
OncetheAxisproductiscalibrated,thespeakertestcanberunatanytime:
1.GotoAudio>Audiosettings.
2.ClickTesttorunthespeakertest.
Note
Itisalsopossibletorunthecalibrationbypressingthecontrolbutton.SeeProductoverviewonpage22toidentifythe
controlbutton.
Prepareanaudiocliplink
Audioclipscanbesettoplaywhenaneventoccurs.
Toprepareanaudiocliplink:
1.GotoAudio>Audioclips.
2.Click
foranaudioclip.
3.Setthevolumeandnumberoftimestorepeattheclip.
4.Clickthecopyicontocopythelink.
SetupdirectSIP(P2P)
VoIP(VoiceoverIP)isagroupoftechnologiesthatenablesvoiceandmultimediacommunicationoverIPnetworks.Formore,
seeVoiceoverIP(VoIP)onpage16.
InthisproductVoIPisenabledthroughtheSIPprotocol.FormoreinformationaboutSIP,seeSessionInitiationProtocol(SIP)on
page16
TherearetwotypesofsetupsforSIP.Peer-to-peerisoneofthem.Usepeer-to-peerwhenthecommunicationisbetweenafewuser
agentswithinthesameIPnetworkandthereisnoneedforextrafeaturesthataPBX-servercouldprovide.Forinformationon
howtosetitup,seePeer-to-peerSIP(P2PSIP)onpage16.
1.GotoVoIP>SIPsettingsandselectEnableSIP.
2.InCalltimeout,setthenumberofsecondsthatacallwilllastbeforeitendsifthereisnoanswer.
3.Toallowthedevicetoreceiveincomingcalls,selectAllowincomingcalls.
6