Computer Control
We recommend follow the computer specifications to run the Axis software.
Here is a list of the major components needed:
1. Hard Driver - SSD at least 250 GB or higher
2. Dedicated Graphics with 2GB RAM minimum (Nvidia GTX 1050ti or
higher)…..absolutely no intel onboard graphics. These will pull power away from processor and
cause issues with data collection.
3. Intel i5 or higher processor (No U Series Processors) - We custom build our computers
and use the K Series which is an unlocked and overclockable processor.
4. 8 GB of DDR4 RAM 2133 mhz or higher
Sample : Dell Inspiron 15 5000 Gaming, Lenovo Legion Y520 – GTX 1050TI
We recommend good lighting for the workspace, good air ventilation and internet access for the
dyno computer to be able to email and share charts and results.
12
To Next Page
Loading...