AX-ADCT2
AX-ADCT2
AX-ADCT2
AX-ADCT2
AX-ADCT2
AX-ADCT2
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
1-800-221-0932
axxessinterface.com
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
1-800-221-0932
axxessinterface.com
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
1-800-221-0932
axxessinterface.com
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
1-800-221-0932
axxessinterface.com
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
1-800-221-0932
axxessinterface.com
The AX-ADCT2 is designed to convert 2 channels of
speaker level audio into 2 channels of line level audio.
This allows for the installation of line level products
such as ampli ers, EQs and crossovers on systems
that do not have RCA line level outputs. In addition
this device will also detect the presence of an audio
signal and then generate a +12V output (veri ed by
an illuminated LED) that can be used to turn-on an
aftermarket ampli er.
Features:
80 Watts Maximum Input, Input Circuit Corrects
Crossover Distortion Commonly Found On Other
Brands of LOCs, 6:1 Step Down with Variable Output,
Gold Flashed RCAs, Attractive & Durable Enclosure.
The AX-ADCT2 will shut off 60 seconds after no signal
detected.
The AX-ADCT2 is designed to convert 2 channels of
speaker level audio into 2 channels of line level audio.
This allows for the installation of line level products
such as ampli ers, EQs and crossovers on systems
that do not have RCA line level outputs. In addition
this device will also detect the presence of an audio
signal and then generate a +12V output (veri ed by
an illuminated LED) that can be used to turn-on an
aftermarket ampli er.
Features:
80 Watts Maximum Input, Input Circuit Corrects
Crossover Distortion Commonly Found On Other
Brands of LOCs, 6:1 Step Down with Variable Output,
Gold Flashed RCAs, Attractive & Durable Enclosure.
The AX-ADCT2 will shut off 60 seconds after no signal
detected.
The AX-ADCT2 is designed to convert 2 channels of
speaker level audio into 2 channels of line level audio.
This allows for the installation of line level products
such as ampli ers, EQs and crossovers on systems
that do not have RCA line level outputs. In addition
this device will also detect the presence of an audio
signal and then generate a +12V output (veri ed by
an illuminated LED) that can be used to turn-on an
aftermarket ampli er.
Features:
80 Watts Maximum Input, Input Circuit Corrects
Crossover Distortion Commonly Found On Other
Brands of LOCs, 6:1 Step Down with Variable Output,
Gold Flashed RCAs, Attractive & Durable Enclosure.
The AX-ADCT2 will shut off 60 seconds after no signal
detected.
The AX-ADCT2 is designed to convert 2 channels of
speaker level audio into 2 channels of line level audio.
This allows for the installation of line level products
such as ampli ers, EQs and crossovers on systems
that do not have RCA line level outputs. In addition
this device will also detect the presence of an audio
signal and then generate a +12V output (veri ed by
an illuminated LED) that can be used to turn-on an
aftermarket ampli er.
Features:
80 Watts Maximum Input, Input Circuit Corrects
Crossover Distortion Commonly Found On Other
Brands of LOCs, 6:1 Step Down with Variable Output,
Gold Flashed RCAs, Attractive & Durable Enclosure.
The AX-ADCT2 will shut off 60 seconds after no signal
detected.
The AX-ADCT2 is designed to convert 2 channels of
speaker level audio into 2 channels of line level audio.
This allows for the installation of line level products
such as ampli ers, EQs and crossovers on systems
that do not have RCA line level outputs. In addition
this device will also detect the presence of an audio
signal and then generate a +12V output (veri ed by
an illuminated LED) that can be used to turn-on an
aftermarket ampli er.
Features:
80 Watts Maximum Input, Input Circuit Corrects
Crossover Distortion Commonly Found On Other
Brands of LOCs, 6:1 Step Down with Variable Output,
Gold Flashed RCAs, Attractive & Durable Enclosure.
The AX-ADCT2 will shut off 60 seconds after no signal
detected.
The AX-ADCT2 is designed to convert 2 channels of
speaker level audio into 2 channels of line level audio.
This allows for the installation of line level products
such as ampli ers, EQs and crossovers on systems
that do not have RCA line level outputs. In addition
this device will also detect the presence of an audio
signal and then generate a +12V output (veri ed by
an illuminated LED) that can be used to turn-on an
aftermarket ampli er.
Features:
80 Watts Maximum Input, Input Circuit Corrects
Crossover Distortion Commonly Found On Other
Brands of LOCs, 6:1 Step Down with Variable Output,
Gold Flashed RCAs, Attractive & Durable Enclosure.
The AX-ADCT2 will shut off 60 seconds after no signal
detected.
To Previous Page
Loading...