EN-16
accordance with the wiring rules.
To achieve this install appropriate
switched fused connection unit.
• Note! A switched fused connection
unit having a contact separation of at
least 3mm in all poles should be
connected in fixed wiring.
• Connect the incoming positive,
neutral and earth cables to the
terminals of the switched fused
connection unit. Ensure connections are
tight.
• The spur outlet must still be accessible
even when your oven is located in its
housing to enable the appliance to be
disconnected from the mains supply.
Warnings
•A steam cleaner is not to be used.
To Next Page
Loading...
