AYA AF71BP - Start;Pause, Cancel, and Other Operations

EN-30
(6) In the reservation status, first touch of the“ ” can query the cooking
start time, the clock position shows the cooking start time, clock value
flashes. Re-touch “ ” button or 10s later automatically return to the
system time display.
9. Reminder function
Touch “ ” button under standby state to enter to reminder function setting,
at this time the clock position hour value will flash, minute value will long lit.
The reminder time setting icon “ ” flashes, the reminder time icon “ ” is
always on.
(5) Rotate programming switch KB2 to set the hour, at this time the hour
value is always bright, the value setting range is 0-23;
(6) Touch “ ” button again, minute value flashes, and hour value keeps
bright;
(7) Rotate programming switch KB2 to set the minute, at this time the value
of the minute is always bright, the setting range is 0-59;
(8) When the alarm time is set, you can touch “ ” for confirmation. At this
time, the display shows the system time, the reminder time setting icon
“ ” goes out ,the second icon “ ” flashes, the “ ”is always on, and the
reminder time starts to count down in seconds. When the time
countdown is 00:00, buzzer will sound for 1 minute (1s/time), and the
reminder time icon “ ” is always flashing (1s/time), then press any
button to stop flashing.
Note:
(4) During setup, second icon “ ” and alarm clock icon “ ” will always
bright.
(5) During setup, touch “ ” button will cancel the current reminder time
setting and return to standby state.
(6) If a reminder function has been set, then reminder icon “ ”should
always be displayed when the menu is working, and the reminder time
can be queried.
10. Start/pause/cancel function
 After setting up the cooking function, touch “ ” button to start working;
if touching “ ” button when the cooking is suspended, you can restart
the work.
 During oven cooking, touch “ ” button once can pause the cooking,
temperature and time will flash display, oven working icon“ ” flashes,
function icon is always on; Touch “ ” button again will cancel current