AZ-Delivery MG90S - Page 2

Areas of applicaon
These servos are used in model building projects to provide precise control movements. They are suitable for applicaons
where precise moon controls are required.
Required knowledge and skills
Installaon and commissioning should be carried out by people with basic knowledge of model making or manual skills.
Knowledge of handling control electronics and mechanical components is required.
Operang condions
Model building servos are intended for use in model building applicaons such as RC vehicles, airplanes and boats. During
assembly, care must be taken to ensure that the servo can move freely within its adjustment range and without blocking
Environmental condions
The opmal ambient temperature is between -10°C and 50°C. The servo motor must be operated in a dry and clean environ-
ment.
Intended Use
The servo is intended for controlling mechanical movements in model building applicaons. All connecons and connecons
must be made according to the instrucons in the user manual. The voltage and current must be within the specied limits.
Improper foreseeable use
The servo must not be used for applicaons that are outside the specied performance limits. It must not be used in safe-
ty-crical applicaons or in extreme environmental condions. Applicaon in areas of medical, aerospace and aerospace
technology is not permied. Improper use can result in signicant hazards.
disposal
Do not discard with household waste! Your product is according to the European one Direcve on waste electrical and
electronic equipment to be disposed of in an environmentally friendly manner. The valuable raw materials contained therein
can be recycled become. The applicaon of this direcve contributes to environmental and health protecon. Use the col-
lecon point set up by your municipality to return and Recycling of old electrical and electronic devices. WEEE Reg. No.: DE
62624346
safety instrucons
Aenon: Danger from lubricants and adhesives! Note: Use only recommended lubricants and adhesives and avoid contact
with harsh chemicals. Aenon: Danger from cleaning soluons and chemicals! Note: Use only recommended cleaning
products and avoid contact with harsh chemicals. Cauon: Keep the product out of the reach of children and pets to avoid
accidental contact and swallowing of small parts. Note: Store the product in a safe, closed container when not in use. Aen
-
on: Danger from lubricants and adhesives! Note: Use only recommended lubricants and adhesives and avoid contact with
harsh chemicals. Aenon: Danger from cleaning soluons and chemicals! Note: Use only recommended cleaning products
and avoid contact with harsh chemicals. Cauon: Keep the product out of the reach of children and pets to avoid accidental
contact and swallowing of small parts. Note: Store the product in a safe, closed container when not in use. Aenon: Risk
of injury from moving parts! Note: Keep your hands and other body parts away from moving parts of the servo. Aenon:
Danger due to improper aachment of the servo arm Note: Make sure the servo arm is mounted rmly and securely. Aen-
on: Danger due to mechanical stress! Note: Avoid strong vibraons and mechanical shocks that could damage the servo.
Aenon: Danger due to unpredictable movement! Note: Before installaon, make sure that the servo motor is in its zero
posion to avoid unforeseen movements when starng up for the rst me. Aenon: Danger in the event of malfuncons
or damage! Note: Switch o the supply voltage immediately and do not try to solve the problem yourself. Aenon: Danger
of short circuit if polarity is reversed! Note: Make sure the Sorvo is connected properly to avoid a short circuit Aenon:
Danger of overheang under high loads or blockages! Note: Operate the servo only within the specied load limits and avoid
blocking movements. Aenon: Risk of re due to improper installaon! Note: Make sure the servo is mounted correctly
and there are no heat-sensive materials nearby. Aenon: Hot housing aer long periods of operaon! Note: Make sure
that the resulng heat can be dissipated to avoid heat build-up.