6. Confirming of the battery indicator
1) Supply 2.5V to the transmitter and cofirm that the battery status indicates 3 levels .
2) Supply 2.0V to the transmitter and cofirm that the first indicator is flashing.
7. Other confirming points
1) Set up the receiver for communication check
2) Connect the lavalier microphone to the transmitter and send
the audio to check whether it operates correctly
3) Make an impact on the body and check whether the unit does not
show any abnormal sound
5) Factory default conditions
[Power]:OFF, [Channel]:42-01,[Audio SW]:OFF,[Phantom Power]:OFF
Azden corp.
To Next Page
Loading...