Page 7
ATTACH POST CAPS BETWEENTHEPOST APPLICATIONS
Attach Post caps using exterior grade caulk/adhesive applied to the inside corners
of the post caps
(Dia. #5).
5
INSTALLING DRINK RAIL – LEVEL PANELS
FOR CLASSIC COMPOSITE SERIES RAILING
4
Drink Rail (deck board)
Between-the-Posts Application
Universal Rail
(purchased separately)
#8 2" Stainless Steel
Pan Head Screws
(included with Universal Rail)
Drink Rail (deck board)
Over-the-Posts Application
Universal Rail
(purchased separately)
#8 2" Stainless Steel
Pan Head Screws
(included with Universal Rail)
Dia. #4A
Dia. #4B
Post Caps
Attached with exterior
grade caulk
Dia. #5
FASTEN DECK BOARD TO UNIVERSAL RAIL
Place the Deck Board on top and centered over the Universal Rail. For both Between-the-Post
(Dia #4A) and Over-the-Post and Applications (Dia #4B), secure Deck Board and Universal Rail
to Upper Support Rail using the 3/16" holes that were drilled in Step 1, use #8 2" Stainless Steel
Pan Head Screws (included with Universal Rail).
IMPORTANT NOTE:
When installing cWPC decking (TimberTech PRO or TimberTech Edge), anchoring holes must
be pre-drilled thru the rail assembly and into the deck board. Using the 3/16" holes that were
drilled at 15" intervals as guides, drill a 1/8" diameter ¾" into the bottom of the deck board. Care
must
be taken not to drill through the top of the deck plank.
To Next Page
Loading...