540A/640A Integrated amplifier
9
Bi-aamping
The azur amplifiers are equipped with PRE-OUT sockets. If your
loudspeakers have two sets of terminals then it is possible to bi-amp
your system using a further power amplifier. Bi-amping uses two
amplifiers to drive the bass and treble units in the loudspeakers
independently, resulting in even greater clarity coupled with improved
control and dynamics. An example of a bi-amp setup is illustrated in the
diagram adjacent.
Please note that if using a second azur amplifier as the slave amplifier,
any line input can be used to connect from the master’s Pre-Out.
Using SSpeaker BB connections
The Speaker B connections on the back of the amplifier allow a second
set of speakers to be used, which could be for another room.
lease ensure that loudspeaker terminals are fully tightened
Please ensure that loudspeaker terminals are fully tightened
Veuillez s'assurer que les bornes de l'enceinte sont entierement serrees
Veuillez s'assurer que les bornes de l'enceinte sont entierement serrees
www.cambridge-audio.co.uk
esigned and Engineered in London, England
Designed and Engineered in London, England
Risque de choc electrique
azur 640A Integrated Amplifier
lease ensure that loudspeaker terminals are fully tightened
Please ensure that loudspeaker terminals are fully tightened
Veuillez s'assurer que les bornes de l'enceinte sont entierement serrees
Veuillez s'assurer que les bornes de l'enceinte sont entierement serrees
www.cambridge-audio.co.uk
esigned and Engineered in London, England
Designed and Engineered in London, England
Risque de choc electrique
azur 640A Integrated Amplifier
Master aamplifier
Slave aamplifier
- if using an integrated amplifier, volume must be set to full
CD player
Bass Bass
Treble Treble
Downloaded From DvDPlayer-Manual.com Cambridge Audio Manuals