To Next PageTo Next Page
Need help?Do you have a question about the B & D Electromedical NIPPY Clearway and is the answer not in the manual?
General| Tidal Volume | 50-2000 ml |
|---|---|
| Trigger Sensitivity | Adjustable |
| Modes | CPAP |
| Respiratory Rate | 4-60 breaths per minute |
| I:E Ratio | 1:4 |
| Alarms | High pressure, low pressure, apnea, power failure |
| Power Source | internal battery |
| Display | LCD |
Lists medical conditions where the device should not be used.
Describes the information presented on the device's LCD screen.
Illustrates the front panel components of the Clearway device.
Identifies the connectors and features on the rear panel.
Information on the device's internal memory back-up battery.
Description and use of the optional handheld control switch.
Details on the breathing circuit and its connection.
Explains the layout and information on the main display screen.
Instructions for adjusting operational parameters on the device.
Guide to accessing and navigating the device's menu system.
How to access and use the context-sensitive help system.
Guidance on using help when device settings are locked.
Overview of the different treatment modes available.
Procedure for selecting and enabling operational modes.
Steps for configuring and operating the device in manual mode.
Introduction to the automatic treatment sequences.
How to view graphical representations of treatment sequences.
Procedure for manually overriding automatic sequences.
Details on the basic auto cycling treatment mode.
Configuration steps for the basic auto mode.
Information on setting up timed programmable auto sequences.
Configuration steps for timed programmable auto mode.
Information on setting up triggered programmable auto sequences.
Configuration steps for triggered programmable auto mode.
Details on the Non-Invasive Ventilation (NIV) mode.
How to configure airway pressure vibration settings.
Setting options for post-exsufflation breaths.
Viewing and managing patient compliance data.
Instructions for powering the device using mains or external batteries.
Information on expected battery operational duration.
Details regarding the use and connection of external battery packs.
Procedure for testing the battery's performance and condition.
Recommendations for optimal battery usage and care.
Guidelines for the proper disposal of used batteries.
Connecting the device to external monitoring equipment.
Schematic showing the pneumatic pathways of the system.
Performance details in varying environmental conditions.
List of available accessories and spare parts.
Critical safety warnings to prevent harm or damage.
Important cautions for safe operation and maintenance.
Inspection guidelines for the power lead.
Instructions for cleaning the device's external casing.
Procedures for inspecting and maintaining the input air filter.
Information on cleaning or replacing the breathing circuit.
Availability of technical manuals for repair.
Information regarding the device's warranty coverage.
Procedures for returning the device for factory service or repair.
Guidance on electromagnetic emissions from the device.
Guidance on electromagnetic immunity for the device.
Minimum distances for portable RF equipment to maintain EMC.
Table of transmitter power outputs and separation distances.
