Need help?Do you have a question about the B52 GEMINIS X and is the answer not in the manual?
Main box learns codes from transmitter, maximum up to 4 codes.
Alarm retains arming status after power supply interruption.
Details arming/disarming states, LED, starter killer, and central lock.
How to activate and deactivate the panic mode.
How to activate anti-car jacking mode using the transmitter.
How to temporarily bypass shock sensor or all sensors.
Feature to arm and disarm the system without siren chirps.
How to locate the car using the transmitter.
How to activate valet mode via transmitter, disabling alarm functions.
Alarm automatically re-arms after disarm if doors/ignition are not used.
System chirps more if a door was opened while armed.
Handles continuous sensor triggers by disabling specific zones.
Description of LED states for different system modes.
How to disarm the alarm in two stages, stopping triggers and disarming.
Defines sensitivity levels for light touch (warn away) and heavy touch.
Last door arming and door lock options configurable via jumpers.
How door sensor detection differs for cars with or without dome light delay.
Automatic door locking when ignition is on, and unlocking when off.
Features for air compressor central locks and two-pulse unlock.
Function of the auxiliary output for trunk opening or remote engine start.
Anti-car jacking activated by an external toggle switch.
Various operations controlled by the over-ride switch, including code learning.
Detailed steps for programming new transmitters.
Assignments for Arm, Disarm, Panic, and Auxiliary output functions.
Configuration settings for various features via P1-P8 jumpers.
To Next Page
General