Need help?Do you have a question about the BAB TECHNOLOGIE EIBPORT V3 and is the answer not in the manual?
General| Brand | BAB TECHNOLOGIE |
|---|---|
| Model | EIBPORT V3 |
| Category | Gateway |
| Language | English |
Ensure EIBPORT is in the same subnet as the PC. Create a project backup as firmware update deletes all data and resets to factory default.
Select EIBPORT, enter authentication data, choose firmware image, and click 'Start EIBPORT Update' to load the new firmware.
Enable 'Reset network' to set EIBPORT to default IP 192.168.1.222. Leave disabled to retain current IP address.
Describes LED states for EIBPORT in normal operation and when firmware is being loaded, indicating bus and LAN traffic.
Details the LED indications when the firmware image has been successfully loaded and verified, showing LAN traffic status.
Outlines the LED patterns indicating that the firmware is currently being installed, including specific error indicators.
Explains the LED indicators displayed while the EIBPORT device is booting up after a firmware installation or reset.
To Next Page