NederlandsFrançais Deutsch English
Instruction manual Rain tent
7
Step 2:
Attaching the canvas
The order of assembly is essential for an optimum fit:
1. Unfold the tent canvas and unzip all zips
2. Place the canvas over the poles: the broad side on the sides and the narrow side with the Babboe logo at
the side of the handlebar. Make sure the poles are placed correctly in the sleeves of the canvas
3. Pull the canvas downwards and close all zips
4. Feed the ends of the tie down straps through the corners and tighten slightly (A)
5. Is the tent in place? Tighten all tie down straps so the tent is secure
Stap 3:
Opening the windows
Would you like to cycle with open windows? Fold the windows carefully and attach to the hook on the top of the
rain tent using the elastic band.
To Next Page
Loading...