To Next PageTo Next Page
Need help?Do you have a question about the Baby Brezza BRZ0057 and is the answer not in the manual?
Instructions for cleaning the Instant Warmer, including hand-washing and caution about electronics.
Details the terms and conditions of the one-year limited warranty for the Baby Brezza Instant Warmer.
Provides contact details and website for customer service and support for Baby Brezza products.
Essential safety precautions and warnings to follow when using the Baby Brezza Instant Warmer.
Identifies and labels the various parts of the Baby Brezza Instant Warmer appliance.
Critical warnings regarding water type, filling levels, and keeping the tank covered to avoid contamination.
Step-by-step guide on how to set up, operate, and dispense water from the Instant Warmer.
The Baby Brezza Instant Warmer is a convenient appliance designed to provide warm water for infant formula preparation quickly and efficiently. Its primary function is to heat and maintain water at one of three pre-set temperatures, ensuring that warm water is always available for mixing formula, thereby simplifying feeding times for parents.
The Instant Warmer operates by heating water stored in its Water Container to a user-selected temperature. It features a heating element that warms the water, and an LED indicator system to communicate the current status and selected temperature. Once the desired temperature is reached, the device maintains it, allowing for on-demand dispensing of warm water. This eliminates the need to boil water, wait for it to cool, or microwave water, which can create hot spots. The device is designed for household use and is intended specifically for warming water for infant formula, not for other liquids or purposes.
To begin using the Instant Warmer, users must first hand wash the Water Container and Lid. After plugging in the power cord, the device powers on, indicated by a blue LED light, signifying the "heater off - room temperature" mode. The Water Container should then be filled with distilled or boiled water that has cooled to room temperature, ensuring the water level is always kept above the MIN line and the tank is covered with the lid to prevent contamination. It is crucial never to fill the container with formula, boiling water, or any liquid other than water. The manufacturer recommends refreshing the water every 24-48 hours and rinsing the container each time it's refilled.
The Instant Warmer offers three temperature settings, which are selected by repeatedly touching the temperature button. The LED lights correspond to these settings: a blue LED indicates the heater is off and the water is at room temperature, a yellow LED signifies "body temperature," and a red LED indicates "warmer than body temperature." When the water is warming to the selected temperature, the LED will flash. Once the target temperature is achieved, the LED will remain solid. This allows parents to choose the ideal temperature for their baby's formula. The device can be left plugged in and set to the desired temperature, ensuring warm water is continuously ready for use. The warming time can vary, typically taking 10-20 minutes, depending on the initial temperature of the water poured into the container.
Dispensing water is straightforward: a bottle is placed under the Dispensing Spout, and the Dispensing Lever is pressed to release water. Releasing the lever stops the flow. After dispensing, formula powder is added to the bottle, following the formula manufacturer's specific mixing ratio and preparation instructions. This ensures proper nutrition and safety for the baby. The design emphasizes ease of use, allowing for quick preparation of bottles, which is particularly helpful during night feedings or when time is limited.
Proper maintenance is essential for the longevity and safe operation of the Baby Brezza Instant Warmer. Before any cleaning, the device must always be unplugged. The Water Container and Lid require hand washing in warm, soapy water, followed by thorough rinsing and drying before each use. It is critical not to immerse the entire Instant Warmer unit, its cord, or plug in water or any other liquid, as this can cause electric shock and permanent damage to the electronics, which is not covered by the warranty. The device is not dishwasher-safe; using a dishwasher could damage the internal electronics.
If the Instant Warmer is accidentally immersed or water gets inside, users should wipe it with a clean, dry cloth and allow it to dry completely before its next use. The base of the unit should only be wiped with a damp cloth. Abrasive pads should never be used to clean any parts of the Instant Warmer, as they can cause damage. Regular cleaning of the Water Container and Lid, along with wiping down the base, helps maintain hygiene and prevents contamination.
The device is designed with safety in mind, including instructions to ensure it is placed on a level surface free of debris, with its rubber pads touching the surface. It should not be placed near hot gas or electric burners, or in a heated oven. The power cord should not hang over the edge of a table or counter, nor should it touch hot surfaces. Any servicing other than cleaning should be performed by an authorized service representative to ensure proper function and safety. The manual also advises against operating the appliance if it has a damaged cord or plug, or if it malfunctions or has been dropped or damaged. In such cases, contacting customer service is recommended. These maintenance guidelines are crucial for ensuring the device remains safe and effective for its intended purpose of preparing warm water for infant formula.
General| Product Type | Food Warmer |
|---|---|
| Model Number | BRZ0057 |
| Heating Method | Steam |
| Auto Shut-Off | Yes |
| Material | Plastic |
| Indicator Light | Yes |
| Temperature Settings | Multiple settings |
| Bottle Compatibility | Most bottle brands/types |
| Heating Time | 3 to 5 minutes |
