What to do if my Baby Brezza BRZ0098 Baby Accessories appliance will not start?
If your Baby Brezza Baby Accessories appliance isn't starting, first ensure it's properly plugged into the power outlet. Also, make sure to press the On/Off switch before selecting a function. Finally, check that there's enough water in the heater plate area; you need to add 120ml of water.
Why is there scaling on the water tank heater plate of my Baby Brezza Baby Accessories?
Scaling on the water tank heater plate of your Baby Brezza Baby Accessories is likely due to persistent use of mineral-rich water. To resolve this, clean the heater plate after each use and switch to using distilled water.
General| Brand | Baby Brezza |
|---|---|
| Model | BRZ0098 |
| Category | Baby Accessories |
| Language | English |
Details how to use the sterilize and auto-dry function, including time selection.
Explains the procedure for using the sterilization function without drying.
Provides instructions for operating the dryer function independently.
Offers guidance on how to clean the appliance and its parts.
Troubleshooting steps for when the appliance fails to turn on.
Information on resolving mineral scaling issues on the heater plate.
Details the terms, conditions, and coverage of the product's warranty.
To Next Page
